Engine control module work: input circuit faults, coding, programming, cloning and module replacement on Bosch DMEs fitted to the N12, N14 and N18.
2010 MINI Cooper S (R56, N14 1.6L Turbo)
P0335
How to test an R56 MINI Cooper crankshaft position sensor with an oscilloscope - supply, ground, Hall switching and signal amplitude - before selling a sensor.
Read the diagnosis →2007-2016 MINI Models (R55-R61 family)
A second-generation MINI DME was cloned into a compatible donor ECU supplied by a mechanic. See the supported-family reference and compatibility checks.
Read the diagnosis →2010 MINI Cooper S (R56, N18 1.6L Turbo)
Advanced case study on CAS immobiliser replacement for a 2010 MINI Cooper S (R56) — why the DME and ISN matter, and why a used CAS is never plug-and-play.
Read the diagnosis →2010 MINI Cooper S (R56, N14 1.6L Turbo)
A0B1A0B42BD42983
A 2010 MINI Cooper S cranked but would not start with no RPM at the DME. Scope testing traced it to a dead crank sensor signal bias inside the DME.
Read the diagnosis →minicooperservicecenter@gmail.com
Initial diagnostic: $150 for one primary concern. Additional concerns or complex diagnostic work may require additional time and charges. Standard labor rate: $150 per hour.
Florida MV Registration #MV114761